Ammonia LR Photometer.....
This is a very popular meter for
obvious reasons. Range 0.00 to 3.00 mg/l resolution 0.01 mg/l
Battery, instructions 2 test tubes included. Simple to use,
results in less than 4 minutes. You will need reagents
and these are available see below……
Specifications.....
|
Range |
0.00 to 3.00
mg/L |
| Accuracy |
+/-0.04mg/L +/-4% of reading |
|
Method |
Adaptation of
the ASTM Manual of Water and Environmental
Technology, D1426-92, Nessler method. |
| Light Source |
LED (Light Emitting Diode) |
|
Auto Off |
After 10
minutes of non-use |
| Power Supply |
Battery Type/Life (1) 9V /
approx. 40 hours of continuous use. |
|
Dimensions |
180 x 83 x 46mm
(7.1 x 3.3 x 1.8") |
| Weight |
290g (10 oz) |
| SKU |
Description |
Price |
Order |
|
HI-93700 |
Ammonia LR Photometer |
£175.00 + Vat |
 |
|
HI-93700-01 |
Ammonia LR Reagent 0.00-3.00mg/L 100
tests |
£31.75 + Vat |
|
| Nitrite
LR Photometer.....Range 0.00
to 0.35mg/l resolution 0.01 mg/l Battery, 2 test tubes,
instructions, included. Simple to use, results in 6
minutes.
Nitrite Meter…… You will need reagents and these are
available see below……
Specifications.....
|
Range |
00.00
to 0.35 mg/L |
| Resolution |
0.01 mg/L |
|
Accuracy |
+/-0.2mg/L +/-4% of reading |
| Method |
Adaptation of the EPA
method 354.1; The reaction between nitrite
and the reagent causes a pink tint in the
sample. |
|
Light Source |
LED
(Light Emitting Diode) 470 nm |
| Light Detector |
Silicon Photocell |
|
Auto Off |
After
10 minutes of non-use |
| Power Supply |
Battery Type/Life (1) 9V
/ approx. 40 hours of continuous use. |
|
Dimensions |
180 x 83 x 46mm (7.1 x 3.3 x
1.8") |
| Weight |
290g (10 oz) |
| SKU |
Description |
Price |
Order |
|
HI-93707 |
Nitrite LR Photometer |
£195.00 + Vat |
|
|
HI-93707-01 |
Nitrite LR Reagent 00.00-0.35mg/L 100
tests |
£22.00 + Vat |
|
|
Waterproof pH & Temperature Meter:
A superb digital dip and read meter, automatic 2
point self calibrating feature, full microprocessor circuit with
automatic compensation resolution 0.1 and temperature meter can
be set to f or c scale Batteries, Instructions, & 2 buffer
calibration solutions are included free. replaceable pH probe.
Checktemp C:
A highly accurate meter. Range –50 to +150 C,
resolution 0.1 Immersion time only 20 seconds for a truly
accurate reading. Self calibration test feature. Batteries &
instructions included. Rated for food, water, & soil use. 5”
stainless steel probe (not floating)
T.D.S. Meter:
Shows a good correlation to measuring hardness
if no salt is present. Measures in mg/L another useful dip and
read digital meter. Supplied with buffer solution.
| 
