ITT Industries - HydroAir (Marlow) Pumps

ITT Marlow, ITT HydroAir as they are now known, have been renowned the world over for producing some of the finest and most efficient pumps for many applications now for a great many years.

ITT HydroAir (Marlow) is a Name You Can Trust without fear - We have ourselves been using ITT  pumps now for the past 15 years and those pumps are still working 24 hours per day 365 days a year...

These self priming glass reinforced plastic pumps are ideally suited to all aquaculture, waste water or any pumping applications where chemical resistance is required. The pumps are manufactured from plastic and 316 stainless steel,  as such they can be used without fear of corrosion in sea-water or brine solution. Also because of the materials of construction, the pumps do not impart any metal ions into the water that could be toxic to fish. We believe that these are the best pumps of their type in terms of their efficiency and performance.

Some of the important features of the pumps are given below, however please contact us for more details and information.

• corrosion resistant modern compact design
• polypropylene tank high chemical resistance
• single phase & three phase versions available to order
• self priming to 3 metres, once primed the suction lift is up to 7 metres
• suitable for pumping heads up to 20 metres (depends on model)
• very efficient, high water flow for low power consumption
• continuously rated - silent running
• very reliable pump, will give many years of trouble free use
• integral inlet filter basket
• high pressure easy screw on filter cover
• 2 3/4" BSP thread on both inlet and outlet
• easy maintenance/seal replacement (you can do it yourself) 
• Suitable for a wide range of applications including chlorine, bromine, iodine and sea water (if flushed through with fresh water on shut down)

Single Phase ITT HydroAir (Marlow) Single Speed Pumps

ITT HydroAir pump range at a price of 20% and more off the normal list price. These pumps deliver a minimum of 5 cubm/hr of water against a 10m head, shut off head is 12.5m and self priming head is 2.9m. These are very reliable high performance units suitable for continuous operation in freshwater, marine systems and even some corrosive chemical applications. Materials in contact with the water are 316 stainless steel and composite plastic.