P-1 Pond Sealant:

Our most frequently asked question is: ‘What would YOU recommend’

Here at East Riding Koi we work on the theory of trying out as many of the products we sell as possible, and the ‘P’ range of products are all by far our number one favourites!

This Pond Coating (it is not a paint, although is sometimes referred to as such) it is much, much more. The finish that you will get with this product is the next best thing to Fibre Glass.............and at a much less cost……….

This is a Product that we can confidently recommend to our customers ..  and we have been selling this now, and receiving excellent reports on the product, for many years…….

Please note that P1 is a registered brand trade mark and it is only sold under the brand name of P1 and it has no connection with any similar, and inferior products that are being advertised using a similar product .......

The Advantages.

  P1 - It comes as a 'Two Pack' and it is a simple matter when you are ready to apply the dressing to the walls of the pond, to mix the two packs together to start the curing process ....  It is easy to apply and as it is a Water Based product is very easy to mix and use – this goes for all the products in the ‘P’ range the instructions are clear, concise and easy to follow, so as with all instructions as long as they are read fully and carefully before you start you will get the amazing finish that we have described……… Because it is Water Based .. this means that it may be applied to a damp (not running wet) surface unlike other pond sealants ...  and any spills etc, and it can happen, believe me, can simply be washed away .. Also those expensive Paint Brushes and paint rollers, can easily be washed out under the tap ... and not just thrown away…….

Possibly one of the biggest advantages for many pond keepers is Blanket Weed DOES NOT ADHERE VERY EASILY to a P1 surface! If there is any sign of blanket weed it can be easily removed with a soft brush………………

A word of warning.

We do not recommend that you split the packs, if you require 2ltrs to complete the pond (one coat on the first day and the second coat the following) then bye two separate litre pots. Please do not by a 2.5ltr pot and try to half it – the consistency will be wrong and you will not get the superb finish that we tell you, you can expect……….

Life of pot when mixed – 1-2 hours at 18 C

Full Technical Data click here    

But one of the biggest reasons why our customers are choosing to use the P-1 as opposed to other brands .. is the fact that you only need to apply just TWO coats to obtain a super smooth finish .. and you can if you wish - now this is the big thing - apply one coat one day and the second coat the next day .. and if you really do want an even better finish .. then you can apply a third coat on the following day...

Because you only need to use two coats, this of course means that it is going to work out much cheaper for you to complete your pond ..  always worth consideration as these ponds can, and quite often do, cost an arm and a leg ...  we now have hundreds of satisfied customers who have been pleased to use this superb pond coating ...  buy with total confidence - you will be delighted with the final results...

P1 is without doubt or question the Pond Coating which many discerning Pond constructors choose to use today more than any other product - to date the only feed backs we have received have all been positive and complimentary ....

But ofcourse why stop at the pond?

This coating can be used for any of the following applications – this list is not exhaustive……..

Food/Hygiene e.g.: Abattoirs, Dairies/Milking Parlours

Concrete Floors and Walls

Swimming Pools

Pond Surrounds

Plastic Surfaces, Glass

Water Tanks

Garden Ornaments

We have even revamped our cast aluminium Patio Furniture with P1!!!!!!!!!

TRADE ENQUIRIES WELCOME.

We have been able to supply this superb P1 Sealant to many of our overseas customers,

Who have all had the same fabulous results……..

Please take time to have a look at our Pond Construction Cayman Island Pond

How to work out how much you will need from the dimensions of your own pond .

• Take the base area - i.e. Length x Width in feet - write down that figure
• Take the Height of walls x Length of walls in feet - write down that figure
• Take the Height of walls x width of walls in feet - write down that figure - then add those 3 figures together to give you the total area in feet and then simply divide by 9 and that will give you the surface area in square yards which is slightly smaller than square metres - and so that figure will give you plenty to work with ..
• P1 - 1 ltr will give a coverage of a minimum of 5 square meters - but remember that you will need to apply two coats ... so what ever you work the square mtrs to be of your pond, you will need to double that to arrive at the final quantity required .. better to have more than too little and if you do have enough then add a third coat to give you a truly fantastic smooth finish.
   

We also have other products available in the 'P' range - equally as good in every way.... these are:-

P3 Waterstop ...  this is a powder that can be simply rubbed into the leaking brickwork, concrete etc and can even be applied under water .... we can supply this in 1/2 kg and 1 kg tubs ...

SKU	Description	Price	Order
P3-1	P-3 Waterstop 1/2 kg	£7.13 + Vat
P3-2	P-3 Waterstop 1 kg	£13.13 + Vat

Another good 'P' product is P5 Putty ... a two pack putty that when mixed cures to provide a good repair and can be applied even under water to leaking joints and sealing round pipework etc

SKU	Description	Price	Order
P5-1	P-5 Putty - two pack sealant  1/2 kg	£23.63 + Vat
P5-2	P-5 Putty - two pack sealant 1 kg	£41.45 + Vat