|
The KF12000

KF12000 gravity fed model shown above

KF12000 shown above with optional small
vortex (VF1)
The KF12000 is available as pump fed
(KF12000P) and gravity fed (KF12000G).
It is a high quality, free-standing,
fibreglass, five bay, filter designed to
improve your fish’s environment. Its
“state-of-the art” multi chamber ensures
maximum filtration with the minimum of
maintenance. The unit is suitable for
fish ponds of up to 12000 litres and a
maximum flow rate of 7,500 litres ph.
However, with lighter stocking densities
or in fish free ponds the KF12000 will
comfortably cope with much larger
volumes. Complete with multi spray bar
(pump fed), filter brushes, blue
Japanese matting, foam cartridge,
wadding and flocor.
Its clever design enables it to fit
through a standard 30" domestic door
opening (if required) so it can be
transported through the house for those
properties where there is no side or
rear access.
12000 Litre (5 Bay) 52.5" x 31.5" x
24.5" Deep
Maximum flow rate 7,500 litre per hour
Pump fed - Inlet size 1.5” - Outlet 110mm
solvent
Gravity fed - Inlet size 110mm - Outlet
1.5”
Available as gravity or pump fed complete
with lid, 3 drains, 3 Ball Valves and
media.
Media: flocor, foam cartridge, blue matting
cartridge, brushes with filter wadding
Shipping on the UK Mainland £15.00
|
Shipping Cost on
UK Mainland £15.00
| KF18000 |
|

KF18000
Gravity Fed Filter Complete with media
|
|

KF18000 -
Direction of the water flow though the unit
|
The KF18,000V is a high
quality, free-standing, fibreglass, four bay, filter with
integral vortex designed to improve your fish's environment.
Its "state-of-the art" multi chamber design ensures maximum
filtration with the minimum of maintenance. The unit is
suitable for fish ponds of 18,000 litres and a maximum flow
rate of 11,000 litres per hour. However, with lighter
stocking densities or in fish free ponds the KF18,000 will
comfortably cope with much larger volumes. The integral
Vortex enhances the unit's performance and reduces the
maintenance intervals
The media package consists of:
Bay 1: Eighteen 16" long x 8" diametre polypropylene filter
brushes - They are of a semi-rigid construction with a wire
loop at the end for easy cleaning.
Bay 2: Blue matting - This is an excellent filter media as
it has a large surface area giving it an excellent bio-mass
retention. Its open texture removes larger particles from
the water.
Bay 3: Three layers of reticulated foam with different
density of porosity of each layer. This is on top of a layer
of approximately 2 cubic foot of flocor.
Bay 4: Six way foam block manifold assembly on top of six
cubic foot of Flocor. The large surface area of Flocor tubes
makes it an ideal filter media.
102 ” long x 33”
wide x 32” Deep
Maximum flow rate 11,000 litre per hour
Three drainage points - (Accepts 1.5" solvent weld pipe for
remote drainage)
Supplied with 3 x 1.5" Kockney Koi Ball Valves (Not shown)
It has a 4" inlet and 1.5" outlet.
|
| SKU |
Description |
Price |
Order |
|
KF18000 |
Yamitsu
KF18000 Gravity Fed |
£1,077.20 + Vat |
 |
Shipping Cost on
UK Mainland £15.00
|
KF20,000

The KF20000 (shown above) is an eight
chamber fibreglass design that can be
used for gravity or pump fed by simply
reversing the media. This is currently
the largest single unit in the Yamitsu
Range. Its clever design enables it to
fit through a standard 30" domestic door
opening (if required) so it can be
transported through the house for those
properties where there is no side or
rear access.

KF20000 shown above with our smallest
optional vortex
Note: The larger vortex units are deeper
and have a larger diameter.
We manufacture Vortex units suitable from
2,500 to 5,000 gallons.
-
20000 Litre
(8 Bay)
85.5” x
31.5” x
24.5” Deep
-
Maximum flow
rate 10,000
litre per
hour
-
Single unit
will suit
either pump
or gravity
fed
-
Contains:
lid, 5
drains, 5
Ball Valves
and media
-
Suits pipe
sizes of
110mm and
1.5"
Media
comprises:
alfagrog,
flocor,
filter
wadding,
foamcartridge,
green
matting
cartridge,
blue matting
cartridge
and two bays
of different
graded
brushes
|
|
Shipping Cost on
UK Mainland £15.00
Yamitsu Range of Vortex Units
|
The Kockney Koi VF range of Vortexs are
made from long lasting, high quality
fibreglass.
The VF1 is ideal for flow rates up to
1000 gallons per hour (gph). The VF2 up
to 2000 gph and the VF3 up to 3000 gph. |
|
 |
Shipping Cost on
UK Mainland £15.00
Bio-Fall Filter
| Also From Yamitsu are these
superb 'Boi-Falls' ... this is not only
a waterfall feature, but it is also the
filter for the pond itself ..
build this into the waterfall you are
creating - add a submersible pump into
the pond and you have a filtration
system suitable for ponds up to 1,000
gallons .. You can add two or more
of these Bio-Falls to provide you with
more filtration for the larger ponds and
also to create a superb water fall
feature ..
Size - 43.5"L x 32"W x 28.5"H |
|
 |
 |
|
We have several customers
who have fitted these Bio-Falls and they
are still delighted with them... These
really do simplify the job without
causing too much hard work, although
naturally a certain amount of work is
required - but once done you can sit
back and enjoy and admire your own
handiwork .. |
|
SKU |
Description |
Price |
Order |
|
Biofall |
Bio Fall and Combined filter (without media) |
£161.52 + Vat |
 |
|
Biofall-FB |
Foam Block for Bio Fall |
£6.27 + Vat |
 |
Shipping Cost on
UK Mainland £15.00
|