 |
|
The New
EstroSieve - is:
- Very
compact unit (25x50x65cm, 10x20x25inches)
- Sieves
water without blocking up
- Adaptable
for any system
- Removes
particles from 30 micron upwards
- All solids
are taken directly out of the water
- Prevents
anaerobic situations
- Volume
independent floating capacity
- Economical
way to remove solids
- Easy to
clean and maintain
|
How it works
This unique and patented system allows the water to flow through
hundreds of razor sharp triangular blades which are mounted
(depending on the model) with gaps of 50, 100, 150 and 200 micron
(1 micron=0.001mm).
The water runs against the sharp side of the blade where the
surface tension of the water is broken.
The dirt particles, whether sinking or floating are pushed away
from the sieve due
to the Hydrostatic load created, this causes the solids to be
lifted out of the water.
The dirt from the water is then moved to the base of the sieve
where there is no water running and can be removed easily. This
dirt can not pollute the water anymore by dissolving.
This system will work superbly in the place of vortex's and
especially brush chambers. Both of the filters mentioned are
absolutely not necessary anymore, and it is even better to remove
them completely.
Under the sieve the clean water is pumped away with a maximum rate
of 3300 gallons per hour. Also available is a stainless steel pump
with ceramic bearings, which can be integrated with the total
system. In this way it is possible to run your complete pond
system with only one pump.
This pump can for example run the EstroSieve,
Ozonereactor and biological filter
together.
This unique system, unlike any other, is completely independent of
the waterflow.
EstroSieve can be
used as a gravity fed system with a 110mm inlet and outlet and is
very easy to install on new or existing systems.
This unit combined
with for example a
BubbleBead
and
Ozone-generator, provides the complete solution to your
pond.
A complete 13000
gallon pond system that fits into the back of your car. All
solids, parasites etc. are lifted out of the water meaning much
less ammonia. less nitrite and less nitrate which will also mean
much less algae.
Oxygen Enrichment
The EstroSieve makes further aeration totally unnecessary. At the
point where the water is going through the sieve forms an under
pressure and the oxygen is sucked into the water.
The oxygen
enriched water is very useful to connect directly onto your
biological filter. No dirt anymore and lots of oxygen.
Sieve Units
Different kinds of sieve units are available allowing the solids
from 30 microns upwards to be stripped from the water. Floating
algae, parasites, parasite eggs and fish waste are just a few
things that this unit will lift out of the water. The result is
even better than a very costly sand filter with a fraction of the
running cost.
Floating Algae
The EstroSieve is the only filter which is capable of taking
floating algue out of the water during a period of time. It
becomes a great advantage to take the floating algae out of the
water rather than to kill it with U.V. or ozone.
By
lifting the algae from the water you also take out the
nitrate-element. This will stop the circle of death algae -
ammonia - nitrite - nitrate - algae, EstroSieve is breaking this
visual circle.
 EstroSieve
is combining vortex, brushes and sand filter
Sieve elements are interchangeable and can be supplied separately.
All sieve elements are made with high precision laser technology
for a superior quality. The base of the sieve is made from a
seawater resistant stainless steel 316L for guaranteed quality.
Now
Available - a New Model:
Estrad
introduces the pumped EstroSieve Trickle version.
 The
EstroSieve Trickle is a pumped system, this means the pump is
mounted before the EstroSieve.
The EstroSieve
Trickle is available in a 25 cm wide moulded housing of
polyethylene. The water is pumped directly in the EstroSieve by
the pump.
This water is
divided at the top of the Sieve-screen and works exactly similar
as the normal EstroSieve Gravity. If the water reaches the bottom
of the housing, this water should leace the housing freely (with
no resistance.
This model is very
suitable when using pumped fed multichamber systems. Also in
combination with a skimmer you'll find very good results in
getting out the mechanical dirt.
The system is very compact and has a surface of only 25 x 50 cm
(!) (10 by 20 inches).
Using this latest EstroSieve as a
'Pump Fed' system (pump in pond) can make a tremendous difference
to the Quality of Water within your pond ... it is easy to fit
into existing systems, although you will have to bear in mind that
because you are now pump feeding from the pump in the pond direct
into the EstroSieve - that the water exiting the EstroSieve would
then be a 'Gravity Feed' into any existing biological filtration
you have and may be necessary to adapt that system to suit ....
The EstroSieve
is also available in a double size unit for those larger ponds ...
|
