Links To Koi Industry East_Riding_Different_02.jpg (4104 bytes) East Riding Koi Co.  One of the UK's finest Koi sites. UK.gif (11944 bytes)  
 

 

 

Elecro Cygnet Heaters:

   
Cygnet Aquatic Heater from Elecro

Analogue Control Thermostat
Stainless Steel Flow Tube with Titanium Element
Complete With Power Lead
Available in 1-kW to 4-kW
Compact and easy to use
Construction
Specifically designed to ensure maximum safety, reliability and efficiency, the Cygnet Aquatic heater is user-friendly and offers plug & play installation for the 1 to 3-kW models. The 4-kW model is supplied with a power cord but must be installed by a qualified electrician; it cannot be connected to a 3-pin plug. The thermostat dial gives you control over the desired pond temperature, while the thermal safety cut-out protects against over-heating.

Designed and manufactured in England to the highest specification, the Cygnet features unique and proven coiled heating element technology, whereby a turbulent vortex is created in the water flow. This delivers outstanding efficiency and extended life expectancy by preventing build up of mineral deposits on the heating element, which are specifically designed for pond/aquatic applications.

Construction consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a flow switch with a gold tipped reed, and Titanium fulcrum pin, whilst the inlet moulding has been designed to ensure full immersion of the element, greatly reducing the risk of air locking.

The heater can be vertically wall-mounted or stand on the floor with the control components on the top facing case. Screw fit adapters are supplied to allow connection to standard 1 or 1 flexible pipe work.
Operation
The desired pond temperature can be easily set on the Elecro Cygnet heater using the panel-mounted thermostat dial. Safety and equipment protection is provided by the highly reliable flow switch and over-heating protection is provided by the thermal cut out with manual reset.

 


Minimum Flow Requirement 1m (1,000-litres) per hour Maximum Flow Velocity 17m (17,000-litres) per hour Heating Element Titanium Flow Tube BS 316L Stainless Steel Control Thermostat 0C to 40C (1.0C Differential)

Safety Thermal cut-out 55C (Manual reset)
Flow Switch Gold tipped reed switch with Titanium fulcrum pin Wiring High temperature, silicone sheathed, multi-strand copper conductors

Seals High temperature special formula polymer

Working Pressure 4 Bar maximum

Water Connections 1" BSP female thread

Supplied Fittings Unions for 1" / 50-mm rigid pipe and Hose tails for 1" / 1" flexible pipe

 

SKU Description

Price

Order
EHA-521 Elecro Cygnet Analogue 1kw Heater (5 amp) 193.20 + Vat Order
EHA-522 Elecro Cygnet Analogue 2kw Heater (9 amp) 220.50 + Vat Order
EHA-523 Elecro Cygnet Analogue 3kw Heater (13 amp) 288.75 + Vat Order
EHA-524 Elecro Cygnet Analogue 4kw Heater (18 amp) 373.80 + Vat Order

 

 

Shipping on UK Mainland 10.00 Will Apply to these Heaters ...

WARNING: If your system is a PUMP FED system - then you MUST make provisions to be able to REMOVE THE HOSETAILS once per month to enable you to 'FLUSH' out the body of the Heater using the normal hose pipe .. Failure to do this simple task will cause debris and waste matter to collect on the element which (if not removed) in time may cause the element to burn out.

FAILURE TO OBSERVE THIS ADVICE -  WILL INVALIDATE THE GUARANTEE ....

***
 



ERK Ltd
 

 

Please contact us if we can help in any matter <info@koicarp.net>